Goulds 3298 Chemical Process Pumps

Product Description

Ideal for Moderate to Severe Corrosives!  
The 3298 can handle the tough chemical services.  As a sealless design, it's an effective alternative to pumps with mechanical seal problems.  Meets strictest EPA regulations.

Goulds_Pumps_3298_video.jpg

Download Literature

Specifications

  • Capacities to 1500 GPM (270 m3/h)
  • Heads to 850 feet (259 m)
  • Temperatures to 250° F (120° C)
  • Pressures to 375 PSIG (2586 kPa) 
Design Features

Extended Pump Life

  • ETFE Construction
  • Sealless Design
  • Stationary Silicon Carbide Shaft
  • Optional Silicon Carbide Dryguard™ Bearings

Optimum Performance

  • Non-slip Synchronous Drive
  • Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps

Ease of Maintenance/Installation

  • Minimum Parts
  • No Pump/Motor Alignment Required with Close-Coupled Design
  • ANSI Dimensional
  • Optional Frame Mounted Design
  • No Mechanical Seal

Safety

  • Drive and Driven Magnet Assembly Safety Clearances (Frame-Mounted Design)
  • Adapter and Casing Drain Connections
  • Zero Emissions

Model Features

ETEF Construction for Extreme Corrosion Resistance
ETFE is inert to most chemicals, has good abrasion resistance and toughness compared to most fluoropolymers and thermoplastics. ETFE lined pump casing, containment shell liner and carbon-filled ETFE impeller provide superior corrosion resistance and life unequalled by the most chemically resistant metal pumps.
Sealless Design (Zero Leakage)
The 3298 is a sealless magnetic drive pump which is environmentally safe. No mechanical seal assures total zero leakage on moderate to severe corrosives, hazardous liquids. The 3298 offers users an economical design to meet emission standards or as a solution to pumps with mechanical seal problems.
Simple Operation
Unlike most magnetic drive pumps, the 3298 is as easy to operate as any standard ANSI pump. Non-metallic construction with no heat build-up makes the 3298 ideally suited for tank transfer, tank type unloading or any batch type service.
Installation/ Pump Replacement Flexibility
The 3298 is available in close-coupled (top image) or frame-mounted (bottom image) designs for true installation or pump replacement flexibility. Since the 3298 meets ANSI dimensional standards, retrofitting mechanically sealed ANSI pumps is easy: simply replace the old pump with the equivalent close-coupled or frame-mounted ANSI size 3298.
Rear Impeller Wear Ring
The impeller is fitted with a carbon-filled TEFLON wear ring as standard (Pure TEFLON optional). Wear ring protects and prevents damage to impeller and critical areas of containment shell in unlikely event of bearing failure. Controls axial thrust for maximum bearing life.
Enclosed One-Piece Impeller/Magnet Assembly
Enclosed design minimizes axial thrust, extends thrust bearing life. One-piece construction eliminates front shroud failure possible with two-piece impellers. Neodymium iron magnets are completely sealed within impeller assembly.
Ease of Maintenance
The 3298 design concept is simple - few parts and only one bolt size.
Design Features for Extended Pump Life
Design Features for Extended Pump Life
Dry Run Protection
10X More Dry Run Protection with DryguardTM Bearings

Applications

  • Rail Car or Tank Unloading
  • Batch Chemical Process
  • Specialty Chemicals
  • Column Reflux or Bottoms
  • Reactor Feed

Accessories

A full complement of accessories are available including:
  • Limit Switches (mechanical and proximity type)
  • Positioners
  • Transducers
  • Filter Regulators/Lubricators
  • Enclosures
  • Speed Controls
  • Fail Safe Systems
  • Gate Position Indicators
  • Directional Control Valves
  • Self Supporting Yokes


FAQs

What 3298 configurations are available?

  • Bare pumps in either close coupled or frame mounted configurations.
  • Frame mounted pump packaged with motor and base.
  • Close coupled pump packaged with motor and base.

What baseplates are available?

  • Close coupled carbon steel and zanite Chembase Plus
  • Frame mounted standard cast iron, feature fab steel and zanite Chembase Plus

What bearings are available?

  • Standard Carbon
  • Silicon carbide
  • SAFEGLIDE® silicon carbide

What o-rings are available?

  • Standard acid resistant viton
  • EPDM
  • PFA encapsulated viton

What motors are available?

Goulds choice Chemical Duty Premium Efficiency up to 30 HP

Is the 3298 available through QWIKSHIP?

The 3298 is available on a 24-Hour QWIKSHIP program. Orders received by 11:00 AM can ship the same day. Orders received after 11:00 AM will ship the next day.

How do I place my 24 Hour QWIKSHIP order?

Send us the order!
  • No need to confirm leadtime with SFO Planning if items ordered are part of the program.
  • Orders received by 11:00 AM ship the same day
  • Orders received after 11:00 AM ship the next day
Order should include:
  • PRISM file
  • Clean order check sheet
  • QWIKSHIP order form
  • Customer contact information
  • Customer’s requested on-site date

What if I need a motor that is not part of the program, such as IEEE or explosion proof?

The QWIKSHIP program coupled with motor mounting at your local Goulds PRO Service Center can help provide shorter leadtimes. Here’s how:
  • Get a quote and leadtime commitment for the motor from your local motor distributor.
  • Send order into Goulds with motor quote and leadtime commitment attached.
  • Goulds will have the pump and motor ship directly to your local PRO Service Center for motor mounting. There is a $250 net adder to have this done. Make sure this is included in the order.
Participating PRO Service Centers:
  • Baton Rouge
  • Greensboro
  • Chicago
  • Houston
  • Salt Lake City
How to contact SFO Planning
By email or fax (315-568-7127)

Goulds 3298 Chemical Process Pumps

Product Description

Ideal for Moderate to Severe Corrosives!  
The 3298 can handle the tough chemical services.  As a sealless design, it's an effective alternative to pumps with mechanical seal problems.  Meets strictest EPA regulations.

Goulds_Pumps_3298_video.jpg

Download Literature
Specifications
  • Capacities to 1500 GPM (270 m3/h)
  • Heads to 850 feet (259 m)
  • Temperatures to 250° F (120° C)
  • Pressures to 375 PSIG (2586 kPa) 
Design Features

Extended Pump Life

  • ETFE Construction
  • Sealless Design
  • Stationary Silicon Carbide Shaft
  • Optional Silicon Carbide Dryguard™ Bearings

Optimum Performance

  • Non-slip Synchronous Drive
  • Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps

Ease of Maintenance/Installation

  • Minimum Parts
  • No Pump/Motor Alignment Required with Close-Coupled Design
  • ANSI Dimensional
  • Optional Frame Mounted Design
  • No Mechanical Seal

Safety

  • Drive and Driven Magnet Assembly Safety Clearances (Frame-Mounted Design)
  • Adapter and Casing Drain Connections
  • Zero Emissions

    ETEF Construction for Extreme Corrosion Resistance

    ETFE is inert to most chemicals, has good abrasion resistance and toughness compared to most fluoropolymers and thermoplastics. ETFE lined pump casing, containment shell liner and carbon-filled ETFE impeller provide superior corrosion resistance and life unequalled by the most chemically resistant metal pumps.

    Sealless Design (Zero Leakage)

    The 3298 is a sealless magnetic drive pump which is environmentally safe. No mechanical seal assures total zero leakage on moderate to severe corrosives, hazardous liquids. The 3298 offers users an economical design to meet emission standards or as a solution to pumps with mechanical seal problems.

    Simple Operation

    Unlike most magnetic drive pumps, the 3298 is as easy to operate as any standard ANSI pump. Non-metallic construction with no heat build-up makes the 3298 ideally suited for tank transfer, tank type unloading or any batch type service.

    Installation/ Pump Replacement Flexibility

    The 3298 is available in close-coupled (top image) or frame-mounted (bottom image) designs for true installation or pump replacement flexibility. Since the 3298 meets ANSI dimensional standards, retrofitting mechanically sealed ANSI pumps is easy: simply replace the old pump with the equivalent close-coupled or frame-mounted ANSI size 3298.

    Rear Impeller Wear Ring

    The impeller is fitted with a carbon-filled TEFLON wear ring as standard (Pure TEFLON optional). Wear ring protects and prevents damage to impeller and critical areas of containment shell in unlikely event of bearing failure. Controls axial thrust for maximum bearing life.

    Enclosed One-Piece Impeller/Magnet Assembly

    Enclosed design minimizes axial thrust, extends thrust bearing life. One-piece construction eliminates front shroud failure possible with two-piece impellers. Neodymium iron magnets are completely sealed within impeller assembly.

    Ease of Maintenance

    The 3298 design concept is simple - few parts and only one bolt size.

    Design Features for Extended Pump Life

    Design Features for Extended Pump Life

    Dry Run Protection

    10X More Dry Run Protection with DryguardTM Bearings
Applications
  • Rail Car or Tank Unloading
  • Batch Chemical Process
  • Specialty Chemicals
  • Column Reflux or Bottoms
  • Reactor Feed
Hydraulic Coverage
View large image

    What 3298 configurations are available?

    • Bare pumps in either close coupled or frame mounted configurations.
    • Frame mounted pump packaged with motor and base.
    • Close coupled pump packaged with motor and base.

    What baseplates are available?

    • Close coupled carbon steel and zanite Chembase Plus
    • Frame mounted standard cast iron, feature fab steel and zanite Chembase Plus

    What bearings are available?

    • Standard Carbon
    • Silicon carbide
    • SAFEGLIDE® silicon carbide

    What o-rings are available?

    • Standard acid resistant viton
    • EPDM
    • PFA encapsulated viton

    What motors are available?

    Goulds choice Chemical Duty Premium Efficiency up to 30 HP

    Is the 3298 available through QWIKSHIP?

    The 3298 is available on a 24-Hour QWIKSHIP program. Orders received by 11:00 AM can ship the same day. Orders received after 11:00 AM will ship the next day.

    How do I place my 24 Hour QWIKSHIP order?

    Send us the order!
    • No need to confirm leadtime with SFO Planning if items ordered are part of the program.
    • Orders received by 11:00 AM ship the same day
    • Orders received after 11:00 AM ship the next day
    Order should include:
    • PRISM file
    • Clean order check sheet
    • QWIKSHIP order form
    • Customer contact information
    • Customer’s requested on-site date

    What if I need a motor that is not part of the program, such as IEEE or explosion proof?

    The QWIKSHIP program coupled with motor mounting at your local Goulds PRO Service Center can help provide shorter leadtimes. Here’s how:
    • Get a quote and leadtime commitment for the motor from your local motor distributor.
    • Send order into Goulds with motor quote and leadtime commitment attached.
    • Goulds will have the pump and motor ship directly to your local PRO Service Center for motor mounting. There is a $250 net adder to have this done. Make sure this is included in the order.
    Participating PRO Service Centers:
    • Baton Rouge
    • Greensboro
    • Chicago
    • Houston
    • Salt Lake City
    How to contact SFO Planning
    By email or fax (315-568-7127)

    Related Products

    Parts & Service

    Parts & Service
    Parts and Service focused on reducing TCO and increasing plant output
    Learn more