Goulds HSU Submersible Pumps

Product Description

Hydro-solids pumps.  Recessed impeller easily accommodates large, stringy and fibrous solids without clogging.  Because it is completely submersible, the HSU can be used in virtually and sump application.

Download Literature

Specifications

  • Capacities to 1300 GPM (295 m3/h)
  • Heads to 90 Feet (27 m)
  • Temperatures to 194° F (90° C)
  • Pressures to 100 PSIG (690 kPa)
  • Solids to 6 inches (152 mm)
Design Features
  • Fully Recessed Impeller - Allows large stringy or fibrous material to pass through the pump without binding or clogging.
  • Concentric Casing - Concentric design facilitates flow of pumpage and solids through the pump while minimizing radial loads.
  • Integral Support - Three cast-in legs provide simple, stable support without additional parts.
  • Heavy Duty Motor Adapter - Extra thick in critical areas. Extended shroud encircles impeller and protects casing from wear.
  • Integral Discharge Elbow - Cast-in elbow reduces parts and allows easy installation.

Model Features

Submersible Motors
Goulds submersible series motors are designed and built specifically for tough slurry pumping. Heavy-duty design features for reliability include:
  • UL and CSA Approved Explosion PRoof
  • Epoxy encapsulated and butt-spliced cable entry system prevents liquid from entering top of motor and provides non-wicking design
  • Permanently lubricated and sealed ball bearings
  • F Class insulation and 1.15 service factor standard
  • Tandem mechanical seals provide complete protection for motor internals
  • Thermal protection standard
  • Dual moisture probes provide early warning of seal failure
  • Conforms to NEMA, IEEE, ANSI and NEC standards
  • High temperature options allows operation to 194º F (90º C)
  • 5 year Pro-Rated Warranty
Moisture Dectector
Required on all submersibles for warranty validation. Provides one normally open and one normally closed connection for activating a warning and/or de-energizing the motor

Applications

  • Waste Treatment Plants
  • Reclaim Sumps
  • Sludge Pits
  • General Service Sumps
  • Power Plants
  • Drainage Sumps
  • Sewage Wet Wells
  • Industrial Waste Sumps
  • Collection Basins
  • Wood Yard Sumps


Goulds HSU Submersible Pumps

Product Description

Hydro-solids pumps.  Recessed impeller easily accommodates large, stringy and fibrous solids without clogging.  Because it is completely submersible, the HSU can be used in virtually and sump application.

Download Literature
Specifications
  • Capacities to 1300 GPM (295 m3/h)
  • Heads to 90 Feet (27 m)
  • Temperatures to 194° F (90° C)
  • Pressures to 100 PSIG (690 kPa)
  • Solids to 6 inches (152 mm)
Design Features
  • Fully Recessed Impeller - Allows large stringy or fibrous material to pass through the pump without binding or clogging.
  • Concentric Casing - Concentric design facilitates flow of pumpage and solids through the pump while minimizing radial loads.
  • Integral Support - Three cast-in legs provide simple, stable support without additional parts.
  • Heavy Duty Motor Adapter - Extra thick in critical areas. Extended shroud encircles impeller and protects casing from wear.
  • Integral Discharge Elbow - Cast-in elbow reduces parts and allows easy installation.

    Submersible Motors

    Goulds submersible series motors are designed and built specifically for tough slurry pumping. Heavy-duty design features for reliability include:
    • UL and CSA Approved Explosion PRoof
    • Epoxy encapsulated and butt-spliced cable entry system prevents liquid from entering top of motor and provides non-wicking design
    • Permanently lubricated and sealed ball bearings
    • F Class insulation and 1.15 service factor standard
    • Tandem mechanical seals provide complete protection for motor internals
    • Thermal protection standard
    • Dual moisture probes provide early warning of seal failure
    • Conforms to NEMA, IEEE, ANSI and NEC standards
    • High temperature options allows operation to 194º F (90º C)
    • 5 year Pro-Rated Warranty

    Moisture Dectector

    Required on all submersibles for warranty validation. Provides one normally open and one normally closed connection for activating a warning and/or de-energizing the motor
Applications
  • Waste Treatment Plants
  • Reclaim Sumps
  • Sludge Pits
  • General Service Sumps
  • Power Plants
  • Drainage Sumps
  • Sewage Wet Wells
  • Industrial Waste Sumps
  • Collection Basins
  • Wood Yard Sumps
Hydraulic Coverage
View large image
    PSS Application: Use PSS to find performance curves

    Related Products

    Parts & Service

    Parts & Service
    Parts and Service focused on reducing TCO and increasing plant output
    Learn more