VJC & 5150
Bottom suction vertical cantilever pumps for pumping abrasive slurries. All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
Specifications
- Capacities to 8000 GPM
(1817 m3/h) - Heads to 260 feet (79 m)
- Temperatures to 200° F (93° C)
- Pit Depths to 11 feet (3.4m)
- Solids to 3 7/8 inches (98 mm)
Design Features
- Cantilever Design: No submerged bearings.
- External impeller adjustment: Maintains pump efficiency and performance.
- Dual Volute Casing: Eliminates radial unbalance; reduces wear.
- Materials of Construction: Available in a wide range of corrosive / abrasive resistant alloys.
- Heavy-Duty Bearings
- Bottom Suction: Removes solids from sump floor.
- Removable Suction Liner
- Maximum Interchangeability
Services
- Steel Mills
- Power Plants
- Foundries
- Alumina Refineries
- Cement Mills
- Phosphoric Acid Plants
- Coal Prep Plants
- Phosphate Mines
- Iron Ore Slurry
- Mine Slurry
Hydraulic Coverage
60 HZ/440 RPM
60 HZ/500 RPM
60 HZ/590 RPM
60 HZ/710 RPM
60 HZ/880 RPM
60 HZ/1180 RPM
60 HZ/1760 RPM
60 HZ/3500 RPM
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
