Pump control and monitoring
When a sealless pumps is specificed the Number One user concern is safe and leakfree operation, especially when noxious, toxic, carcinogenic and other hazardous materials are conveyed. The ICM has been designed such that most condition monitoring and speed control devices can be easily and economically installed and retrofitted. The following condition monitoring options are available:
  • Pump Speed Control (Hydrovar® , PumpSmart® etc.)
  • Temperature Monitor
  • Flow and filling level monitor
  • Pressure Monitor
  • Motor load monitor
  • Can temperature monitor
  • Can leakage sensor in the lantern
  • Rolling bearing monitor
  • Connection for external flush supply
Customized solutions on request.
  • Secondary Sealing: The space around the can be sealed against the rolling bearings by means of special shaft or labyrinth seals.
If the can is damaged, the drive side and atmosphere would be protected against the medium for a certain time. Therefore, in conjunction with one of the monitors, this results in an effective preventitive enviromental protection in the case of critical media.