Printable Version of this Page
  • Your Location » 3298

3298

PumpsThe 3298 is designed specifically to handle moderate to severe corrosives with or without solids. As a sealless design, it's an effective alternative to pumps with mechanical seal problems. Meets strictest EPA regulations.

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Download Literature:


Specifications

  • Capacities to 1200 GPM (270 m3/h)
  • Heads to 530 feet (162 m)
  • Temperatures to 250° F (120° C)
  • Pressures to 225 PSIG (1551 kPa)

Design Features

Extended Pump Life
  • Tefzel® (EFTE) Construction
  • Sealless Design
  • Stationary Silicon Carbide Shaft
  • Optional Silicon Carbide Dryguard™ Bearings
Optimum Performance
  • Non-slip Synchronous Drive
  • Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps
Ease of Maintenance/Installation
  • Minimum Parts
  • No Pump/Motor Alignment Required with Close-Coupled Design
  • ANSI Dimensional
  • Optional Frame Mounted Design
  • No Mechanical Seal
Safety
  • Drive and Driven Magnet Assembly Safety Clearances (Frame-Mounted Design)
  • Adapter and Casing Drain Connections
  • Zero Emissions

Services

  • Hydrochloric Acid
  • Hydrobromic Acid
  • Sodium Hypochlorite
  • Chlorine Dioxide
  • Sodium Hydroxide
  • Sulfuric Acid

Applications
  • Rail Car or Tank Unloading
  • Batch Chemical Process
  • Specialty Chemicals
  • Column Reflux or Bottoms
  • Reactor Feed

Hydraulic Coverage


1450 - 1750 RPM

2850 - 3500 RPM

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Find Sales & Service