3316
Two Stage, Horizontally Split Case Pumps designed for applications requiring moderately high head over a wide range of flows. All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
Specifications
- Capacities to 3000 GPM (681 m3/h)
- Heads to 1000 feet (305 m)
- Temperatures to 350° F (177° C)
- Working Pressures to 550 PSIG (3792 kPa)
- 9 Sizes
Design Features
- Casing Removal of upper half permits inspection, maintenance or removal of rotating element without disturbing piping or pump-to-motor alignment.
- Impellers Hydraulically balanced, opposed for radial balance. Opposed cut-waters provide radial balance. Bearing loads are lowered and pump life is improved.
- Wear Rings Easily replaced, protect against casing wear. Running clearances are renewed and overall cost of operation is reduced.
- Maximum Interchangeability Reduces inventory requirements.
- Duplex Thrust Bearing Provides high thrust capacity.
- Materials of Construction Available in all iron or bronze fitted. Most sizes available in steel and stainless steel.
Services
- Boiler Feed
- Mine Dewatering
- Booster
- High Pressure Process
- Condensate
Hydraulic Coverage
Variable Coverage
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
