3408 & 3410
Small Capacity, Single Stage, Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, and Marine Services All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
Specifications
- Capacities to 8,000 GPM
(1817 m3/h) - Heads to 570 Ft. (174 m)
- Temperatures to 350° F (177° C)
- Working Pressures to 400 PSI (2758 kPa)
Design Features
- Horizontally Split Casing In-line suction and discharge nozzles in lower half casing for ease of inspection/maintenance.
- Double Suction Impeller Assures Hydraulic Axial Balance for lower thrust bearing loads, longer pump life, and lower maintenence.
- Dual Volute Casing Assures Radial Balance for lower radial bearing oads, longer pump life and lower maintenance. (Not available on 3408. Availability on 3410 is size dependent.)
- Wear Rings Easily replaceable wear rings renew running clearances and protect against impeller, casing wear. Overall cost of operation is minimized.
- Sealing Flexibility Choice of packing or wide range of mechanical seals.
- Installation Versatility Horizontal or vertical mounting, clockwise/counterclockwise rotation
- Material Flexibility Available in a wide variety of metals from cast iron to stainless steels.
Services
- Process Quench water, stripper bottoms, reboiler circulation, cooling tower.
- Pulp & Paper Primary and secondary cleaner, filtrate, mill water supply, fan pump, headbox supply, shower.
- Primary Metals Cooling water, quench and leaching.
- Municipal High lift, low lift, wash water, waste water, raw water.
- Power Generation Cooling tower, component cooling, service water, ash slucing, heater drain.
- Marine Bilge and ballast, cargo, cooling water, fire pump.
- General River water, brine, sea water.
