3498
Extra Large Capacity, Single Stage, Double Suction Pumps designed for a Wide Variety of Industrial, Municipal, and Marine Applications All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
Specifications
- Capacities to 225,000 GPM (51,098 m3/h)
- Heads to 800 Ft. (244 m)
- Temperatures to 275° F (135° C)
- Working Pressures to 250 PSI (1724 kPa)
Design Features
- Horizontally Split Casing In-line suction and discharge nozzles in lower half casing for ease of inspection/maintenance.
- Double Suction Impeller Assures Hydraulic Axial Balance for lower thrust bearing loads, longer pump life, and lower maintenence.
- Dual Volute Casing Assures Radial Balance for lower radial bearing loads, longer pump life and low maintenance. (Availability is size dependent.)
- Wear Rings Easily replaceable wear rings renew running clearances and protect against impeller, casing wear. Overall cost of operation is minimized.
- Sealing Flexibility Choice of packing or wide range of mechanical seals.
- Installation Versatility Horizontal or vertical mounting, clockwise or counterclockwise rotation, side suction or bottom suction.
- Material Flexibility Available in a wide variety of metals from cast iron to stainless steels.
Services
- Process Quench water, stripper bottoms, reboiler circulation, cooling tower.
- Pulp & Paper Primary and secondary cleaner, filtrate, mill water supply, fan pump, headbox supply, shower.
- Primary Metals Cooling water, quench and leaching
- Municipal High lift, low lift, wash water, waste water, raw water.
- Power Generation Cooling tower, component cooling, service water, ash slucing, heater drain.
- Marine Bilge and ballast, cargo, cooling water, fire pump.
- General River water, brine, sea water.
