3700

Goulds model 3700 API 610 (OH2) (ISO 13709) centerlined mounted process pump designed for optimum reliability. The Goulds 3700 employs state-of-the-art mechanical design features for sustained reliability and performance.

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Download Literature:

• Product Bulletin
• Installation Operation and Maintenance Manual (IOM)
• Product Poster 

Specifications

• Capacities to 6500 GPM (1475 m³/h)
• Heads to 1200 feet (360 m)
• Temperatures to 800° F (427° C)
• Pressures from full vacuum to 870 PSIG (6 kg/cm²)

Design Features

• API-610 - Full compliance with 10th Edition.
• Tangential Discharge - Maximum hydraulic efficiency.
• Finned Bearing Frame - Accommodates high temperatures without need for cooling water.
• Seal Chamber - Meets dimensional requirements of API-610 and API-682.
• Bearings and Seal Chamber Cooling - For extremely high temperature services.
• Mechanical Design - Extra heavy shaft and bearings.
• Back Pull-out Construction - Designed for one craft maintenance.
• Dual Volute Casings - 3-inch discharge and larger.
• Impeller - Multiple closed impellers for most casing sizes.
• Centerline Support - High temperature stability.

Services

• Column Reflux
• Column Charge
• Column Bottoms
• Reboiler
• Stabilizer Overhead
• Injection
• Fuel Blending
• Heat Transfer
• Slop Gas Oil
• Heavy Gas Oil
• Stripper Overhead
• Offsite Hydrocarbon Transfer
• Hot Oil
• Reactor Feed
• Scrubber Circulation
• Tower Bottoms

Hydraulic Coverage

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Product Views

Model Features