HSUL
Submersible recessed impeller pumps easily handle any solid up to its suction/discharge size. Versatile mounting allows pump to stand or to be mounted on an optional slide rail. All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
Specifications
- Capacities to 2800 GPM (636 m3/h)
- Heads to 140 Feet (43 m)
- Pressures to 100 PSIG (690 kPa)
- Temperatures to 194° F 90° C)
- Solids to 6 inches (152 mm)
Design Features
- Fully Recessed Impeller - Allows large, stringy or fibrous material to pass through the pump without binding or clogging.
- Concentric Casing - Concentric design facilitates flow of pumpage and solids through the pump while minimizing loads.
- Legs - Bolt-on legs provide stability on sump floor.
- Mounting Flexibility - Flanged suction and horizontal discharge allow pump to stand or be mounted on optional slide rail.
- Interchangeability - Casing and optional wear ring are interchangeable with Goulds Model HS (horizontal) and VHS (vertical cantilever) pumps to reduce inventory.
Services
- Waste Treatment Plants
- Reclaim Sumps
- Sludge Pits
- General Service Sumps
- Power Plants
- Drainage Sumps
- Sewage Wet Wells
- Industrial Waste Sumps
- Collection Basins
- Wood Yard Sumps
Hydraulic Coverage
720/880 RPM
950/1150 RPM
1450/1750 RPM
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
