JCU

Submersible pumps for handling tough abrasive slurries. Impeller design offers optimum combination of solids handling ability, wear resistance, and efficiency. Optional slide rail assembly available for ease of maintenance.

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Download Literature:

• Product Bulletin
• Installation Operation and Maintenance Manual (IOM)

Specifications

• Capacities to 4000 GPM (910 m³/h)
• Heads to 220 Feet (67 m)
• Temperatures to 194° F (90° C)
• Pressures to 200 PSIG (1380 kPa)
• Solids to 2 inches (50 mm)

Design Features

• Heavy Duty Design - Extra thick wall sections in high wear areas.
• Replaceable Suction Liner - Easy to replace -- protects casing from wear.
• Suction Cover - Bell shaped intake reduces entrance losses and improves suction characteristics.
• Integral Strainer - Suction cover has cast-on vertical tines to prohibit oversized solids from clogging pump.
• Pump Mounting - Three cast-on legs give excellent support and stability. Optional slide rail also available to permit easy removal from sump.
• Maximum Interchangeability - Suction Cover Liner and Casing are interchangeable with Goulds Models JC (horizontal) and VJC (vertical cantilever) pumps.

Services

• Fly Ash
• Chemical Waste Sumps
• Bauxite
• Mill Scale
• Sand and Gravel
• Dirty Water Sumps / Lime Sumps
• Sludge Pits
• Foundry Sand
• Kaolin Clay

Hydraulic Coverage

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Product Views

Model Features