Printable Version of this Page
  • Your Location » SP 3298

SP 3298

PumpsIdeal for Moderate to Severe Corrosives! With or without solids, the SP 3298 can handle the tough Chemical Services. As a sealless design, it's an effective alternative to pumps with mechanical seal problems. Meets strictest environmental regulations.

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Download Literature:


Specifications

  • Capacities to 325 GPM (74 m3/h)
  • Heads to 145 feet (44 m)
  • Temperatures to 250° F (120° C)
  • Effective Static Lift to 20 ft (6 m)

Design Features

Extended Pump Life
  • TEFZEL™ Construction
  • Sealless Design
  • No Suction Check Valve
  • Optional DryguardTM Silicon Carbide Bearings
Optimum Performance
  • Non-slip Synchronous Drive with Neodymium Iron Magnets
  • Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps
Ease of Maintenance/Installation
  • Minimum Parts
  • No Pump/Motor Alignment Required with Close-coupled Design
  • Parts Interchangeable with Models 3298 and V 3298

Services

  • Concentrated Hydrochloric Acid
  • Hydrofluoric Acid
  • Hydrobromic Acid
  • Sodium Hypochlorite (Bleach)
  • Chlorine Dioxide
  • Sodium Hydroxide
  • Sulfuric Acid
  • Rail Car or Tank Unloading
  • Batch Chemical Process
  • Specialty Chemicals
  • Contaminated Runoff

Hydraulic Coverage


1450/1750 RPM

2850/3500 RPM

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Product Views

Cutaway View
Dimensions

Find Sales & Service