V 3298

The V 3298 is designed specifically to handle moderate to severe corrosives with or without solids. As a sealless design, it's an effective alternative to pumps with mechanical seal problems. Meets strictest EPA regulations.

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Download Literature:

• Product Bulletin
• Installation Operation and Maintenance Manual (IOM)

Specifications

• Capacities to 320 GPM (73 m³/h)
• Heads to 460 feet (140 m)
• Temperatures to 250° F (121° C)
• Pressures to 225 PSIG (1551 kPa)

Design Features

• Carbon Fiber Reinforced ETFE Construction
• Sealless Design
• Stationary Silicon Carbide Shaft
• Optional Silicon Carbide Dryguard™ Bearings
• Self Supporting With Optional Feet

• Non-slip Synchronous Drive
• Efficiency Equivalent to Sealed ANSI Pumps, 30% Higher than Metal Sealless Pumps

• Minimum Parts
• No Pump/Motor Alignment Required
• ANSI Dimensional
• Optional Frame Mounted Design
• No Mechanical Seal
• All Parts Except Casing Interchangeable with Models 3298 and SP 3298

• Drive and Driven Magnet Assembly Safety Clearances (Frame-Mounted Design)
• Adapter and Casing Drain Connections
• Zero Emissions

Services

• Hydrochloric Acid
• Hydrobromic Acid
• Sodium Hypochlorite
• Chlorine Dioxide
• Sodium Hydroxide
• Sulfuric Acid
• Methyl Ethyl Ketone

• Rail Car or Tank Unloading
• Batch Chemical Process
• Specialty Chemicals
• Column Reflux or Bottoms
• Reactor Feed
• Process Feed
• Tank Recycle

Hydraulic Coverage

All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)

Product Views

Model Features