JC
Thousands of installations attest to the remarkable versatility of the Model JC Slurry Pump. Fifteen sizes are available in a wide range of materials and configurations, making the JC ideal for most medium duty abrasive and/or corrosive slurry services. Plus, it's designed for extreme ease of maintenance and long hours of reliable operation. All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
Download Literature:
Specifications
- Capacities to 7000 GPM (1600 m3/h)
- Heads to 240 feet (73 m)
- Temperatures to 250° F (120° C)
- Pressures to 127 PSIG (876 kPa)
- Spherical solids to 2 1 /4 inches (57 mm)
Design Features
- Extra Thick Wet End Components For extended wear life.
- Replaceable Wear Liner Low maintenance cost.
- Heavy Duty Power End Increased mean time between failures.
- External Impeller Adjustment Maintains original efficiency; simple and fast.
- Maximum Parts Interchangeability Entire line uses just five power ends.
- Sealing Flexibility Choice of packing, mechanical seals or Dynamic Seal.
Services
- Wet Scrubber Systems
- Waste Sludge
- Fracing Slurries
- Paper Mill Wastes and Liquors
- Clay and Sand Slurries
- Dirty Water
- 70% Kaolin Clay
- Carbon Slurry
- Lime Mud
- Precipitated CaCO3
Hydraulic Coverage
Coverage Chart
All performance curves are found using our free Pump Selection System (PSS) software. Click the following link, where you will register and gain immediate access to all of our up-to-the-minute performance curve information.
Pump Selection (PSS)
